CATAS QUALITY AWARD- COATING SYSTEMS FOR EXTERIOR WOOD

To provide this warranty the product must pass specific trials for exterior use, established specifically for the purpose of ensuring the protection of wood and quality control in production batches. The tests confirm these qualities:

Tensile strength (CATAS WKI)
1 year of natural aging (EN 927-3)
artificial aging using certified equipment (EN 927-6)
Water permeability. (EN 927-5)§ Non-volatile substances within the limits defined, that is to say that the solids content must conform to the limits stated in the technical and safety sheets (UNI EN ISO 3251)
Actual presence in the paint of the declared substances, through Gas chromatographic analysis (PTP CATAS)
Effectiveness of biocide products evaluated by inhibition test on agar. The test consists in exposing the impregnator to fungi cultures for endurance test (PTP CATAS)
Resistance to liquids at low temperature (UNI EN 12720)
Test of wet adhesion (EN 927-8)
Suitability for stacking through pressure test (PTP 140)

Allegati

CQA - CSEW 2909

CQA-CSEW 29/09 for Hydrocrom pigmented, white Cycle consisting in: White impregnator XHT111 thixotropic top-coat HZT12/color

CQA - CSEW 3009

CQA-CSEW 30/09 for Hydrocrom mordent Cycle consisting in: colored impregnator, series XHT/color (one coat of paint) thixotropic top-coat XGC83/color

CQA – CSEW 1004

CQA – 10/04 CSEW (revision 29/04/2015) for Klima Unilack cycle, consisting in: PN410 white primer and Primer PN4/color (one coat of pain) PN6B white top-coat and PN6/color (two coats of paint- 400 microns minimum thickness, wet)

CQA - CSEW 0402

CQA- CSEW 04/02 for Klima Aquatech Cycle, consisting in: Klima Aquatech colored impregnator PN3/color (one coat of paint) Klima Aquatech Thixotropic Top Coat TN921 (two coats of paint - minimum thickness 350 microns - wet)

CATAS QUALITY AWARD- COATING SYSTEMS FOR EXTERIOR WOOD Certifies the quality and durability of the coating cycle of products for exteriors.

Allegati